Standard Peel-N-Place

Standard Peel-N-Place™ packaging consists of individual snap domes attached to a square of pressure-sensitive adhesive tape.

Each individual tactile dome is peeled off the release liner backing and will adhere securely to a circuit board, flex circuit, or membrane. You can specify many of our F-Series, U-Series, P-Series, or M-Series domes in standard Peel-N-Place packaging.

Packaged on adhesive seals that measure 5.3” x 4.5”. Metal domes are aligned in the center of a pre-cut adhesive square. The amount of snap domes per seal is determined by the dome size – typically 20 or 30 domes per sheet.

 

Standard PNP 4leg     Standard PNP Round