Snaptron customer service representatives are committed to seeing your project through from start to finish. No matter how large or small your project is, call Snaptron to get started today.
Standard Peel-N-Place™ packaging consists of individual domes attached to a square of pressure sensitive adhesive tape.
Each individual dome is peeled off the release liner backing and will adhere securely to a circuit board, flex circuit, or membrane. You can specify many of our F-Series, U-Series, BL-Series, P-Series or M-Series domes in standard Peel-N-Place.
Packaged on adhesive seals 5.3” x 4.5”. Metal domes are aligned in the center of a pre-cut adhesive square. The amount of domes per seal is determined by the dome size – typically 20 or 30 per sheet. |
|
 |
|
|
